Handlebar end mirror, black, pair
The glass is convex. An approx. 10 mm longer screw must be used to screw the mirror to the existing handlebar weights.
Important information: These mirrors can be used universally for numerous vehicle types. As these mirrors do not have an E-mark (EG-BE), they are therefore not approved for use in road traffic within the scope of the German Road Traffic Licensing Regulations (StVZO). Assembly and use may only take place for racing, competition or show purposes.
Dimensions:
Diameter mirror 82 mm, glass 75 mm, stem length 75 mm of which 40 mm from the edge of the mirror to the center of the mounting hole.
Fixing hole diameter up to 6 mm and screw head diameter up to 13 mm.
The glass is convex. An approx. 10 mm longer screw must be used to screw the mirror to the existing handlebar weights.
Important information: These mirrors can be used universally for numerous vehicle types. As these mirrors do not have an E-mark (EG-BE), they are therefore not approved for use in road traffic within the scope of the German Road Traffic Licensing Regulations (StVZO). Assembly and use may only take place for racing, competition or show purposes.
Dimensions:
Diameter mirror 82 mm, glass 75 mm, stem length 75 mm of which 40 mm from the edge of the mirror to the center of the mounting hole.
Fixing hole diameter up to 6 mm and screw head diameter up to 13 mm.
| EAN | 4054783728596 |
|---|